DST to VP3 Converter — Free Online, No Sign-Up

Convert your DST file to VP3 format online, no sign-up required. Drop your design and download the converted file in seconds.

Drop your .DST file here

or click to browse your files

Convert to VP3

2 free conversions every 24 h, no sign-up required.

Your files are only used to perform the conversion. Privacy policy

Maximum file size :: 10 MB
Supported formats :: PES, DST, JEF, EXP, VP3 (input and output)
Sign-up :: None for free use
File storage :: None: deleted immediately after conversion

How it works

1. Drop your file
Drag and drop your DST file or select it from your computer.
2. The conversion starts
Your design is automatically converted to the VP3 format, keeping all embroidery stitches.
3. Download the result
Instantly get your VP3 file, ready to use on your embroidery machine.

What changes in the DST to VP3 conversion

Converting DST to VP3 gives the design the thread table it was missing: each section gets a thread entry, editable afterwards in Husqvarna Viking and Pfaff software.

A default thread table is built following the DST stops, with brand and code you can fill in if you wish.
Design dimensions are preserved in millimeters.
The truncated DST header name becomes the starting point for the VP3 design name.
Stitches are carried over as-is: no re-digitizing.

DST or VP3: what are the differences?

	DST .dst	VP3 .vp3
Typical use	Industrial and home (standard)	Home embroidery
Machines concerned	Tajima and most industrial machines	Husqvarna Viking, Pfaff
Colors	No palette: thread-change commands (stops) only	Full thread table (brand, code), up to 255 colors
Metadata	Truncated name, stitch count, dimensions (text header)	Digitizing notes, thread table, dimensions
How to open it	With Tajima DG/ML by Pulse, the free Wilcom TrueSizer, or Embird	With Husqvarna 6D/Premier+ or Pfaff 6D software

Understanding the DST and VP3 formats

Format DST .dst

DST is the Tajima format, now the exchange standard for embroidery: it is accepted by almost every machine, home or industrial, and by all digitizing software. The file alternates stitch, jump and trim commands with « stop » commands that mark thread changes. One key point: it carries no named color palette — matching each section to an actual thread is left to the machine or the operator. A 512-byte text header summarizes the design: name (truncated), stitch count, color-change count and dimensions. When converting, stitches are carried over as-is; only the container and metadata change.

Tajima and most industrial machines

Format VP3 .vp3

VP3 is the format of Husqvarna Viking and Pfaff machines, and the richest of the five formats supported by StitchConverter. It embeds a true thread table (brand, code, color of each section), digitizing notes and a very large number of colors — well beyond the needs of a classic design. A direct consequence for conversion: it is the ideal destination for a design coming from a « flat » format (DST, EXP), since the thread table is rebuilt and stays editable in Husqvarna 6D/Premier+ or Pfaff 6D software. The other way around, converting a VP3 to a simpler format may lose the thread table and notes: stitches, however, remain strictly identical. Design dimensions are preserved in millimeters.

Husqvarna Viking, Pfaff

Machine compatibility and dimensions

The conversion changes neither the stitch count nor the design dimensions: a 90 × 90 mm design remains a 90 × 90 mm design. The maximum embroiderable area depends on your machine and hoop, not on the file: simply check that the converted design dimensions fit inside your hoop. All formats supported here (PES, DST, JEF, EXP, VP3) express stitch positions in the same base unit, which allows conversion without any rescaling.

Other conversions from the DST format

Frequently asked questions

How do I convert a DST file to VP3?

Drop your .dst file in the conversion area above: the conversion to VP3 is automatic. All that is left is to download the converted file.

Why convert DST to VP3 when every machine reads DST?

For Husqvarna Viking and Pfaff machines, VP3 brings a comfort DST lacks: named colors and a visible thread table right in the preview, instead of assigning threads blindly on the machine.

How do I open a DST file?

DST files can be opened with Tajima DG/ML by Pulse, the free Wilcom TrueSizer, or Embird. You can also convert them online for free with StitchConverter.

Is the DST to VP3 conversion free?

Yes. StitchConverter offers 2 free conversions every 24 h, with no sign-up. For unlimited use, go Premium (€1 per 24 h or €5 per month).

Do I need an account to convert a file?

No, no sign-up is required for free use. A Premium account is created automatically when you purchase, and you are identified by e-mail.